Jos , als je twee leds/lampjes onafhanklijk wil laten knipperen is dit met 1 decoder niet mogelijk. Als er ruimte is dan een tweede funktie decoder er in plaatsen en beide decoders gebruiken voor het knipperlicht funftie.Beide wel in de zelfde range laten werken .Ook kan je nog twee knipperlicht elektronica plaatsen die door een funktie uitgang van de decoder van spanning worden voorzien.wil.
12.3.1. Switching on Outputs and Different OptionsEach function output can / must be unlocked prior to using it.Furthermore, each output offers the choice of 12 different lightingeffects:• Dimmer: normal continuous output• Blinker lights: the output flashes with an adjustable frequency.• Inverse blinker lights: The output flashes as above but in theopposite direction. This feature enables you to set up alternateblinkers.• Strobe: flash light.• Double Strobe: double flash light.• Firebox: flickering light simulating the open firebox.• Zoom: slow fade-in and fade-out of light, for steam locomotivesor petroleum lanterns• Mars light• Gyro light• Rule 17: for US steam locomotives. Headlights and back-uplights are dimmed when the locomotive stops and go to fullbrightness when the locomotive moves again. Can beseparately controlled for headlights and back-up lights.• Pulse: output turns off automatically after a certain time. Thisis ideal for Telex un-couplers.• Coupler function: for controlling couplers by Krois® andROCO®