4.1. Can I use the Z21 multiMAUS on the Z21 to control locomotives in the Motorola format as well?Yes, this is possible! The critical requirement is that this data format must be selected in advance in the app for the locomotive setting. In addition to DCC, the Motorola I and II formats can be used. The speed step setting in the app from "Motorola" has the following meaning:"14": Motorola MM I with addresses 1 to 80, 14 speed steps and F0"28": Motorola MM II with addresses 1 to 255, 14 speed steps and F0 to F4"128": Motorola MM II with addresses 1 to 255, 28 speed steps and F0 to F4.The expanded speed steps in this case are coded in what is known as "light trit" . Older MM decoders may not understand this format. Regardless of whether the locomotive is controlled via the app or a hand-held controller, it is always accessed using the format set on the Z21. In other words: You can then also use the Z21 multiMAUS to control a Motorola locomotive.
Goed, je moet via de z21-tool aan moeten geven dat je motorola wil gaan gebruiken.
Niet-Marklin spul ftw!
En waarom is een z21 een k*ding, alleen vanwege die schroefgaten?
En als het allemaal niks is waarom rij je dan nog steeds met MM2 op pukkeltjesrail,
stap dan over op 2rail....