10.10. Configure the PowerPackWhen you connect an external capacitor or PowerPack, you areable to make the decoder switch off after a certain time. CV113 isresponsible for that, since you are able to determine at what timethe decoder is to switch off (as a multiple of 0.0328 seconds). Youshould set a time between 0.3 and 1.0 seconds to prevent yourlocos from driving too far during an emergency.For the PowerPack to work, the function output responsible forthe charge (typically AUX9 for LokPilot, AUX7 for LokPilot micro)must be configured to the „PowerPackControl” function.Set CV 31 = 16, CV 32 = 0 first.Then set CV339 = 31 for LokPilot (AUX9)Then set CV323 = 31 for LokPilot micro (AUX7)