Het RailCom signaal komt dus zeker niet bij de booster en ook niet bij andere decoders. Het komt alleen bij de RailCom detector van de sectie waar de trein op dat moment is.
Many, but not all, command stations generate a preamble with more than the minimum number of 12 bits. The extra preamble bits can be used for the RailCom cutout. Problems arise with multifunction decoders expecting a minimum of 12 or more preamble bits. Many multifunction decoders will function with only 10 preamble bits. Should the command station generate 16 preamble bits, 4 can be used for the RailCom cutout without impairing decoder operation.
// Minimum preamble length#define kPREAMBLE_MIN 10
Het is dus geen echte doorverbinding van de 2 rails, maar alleen een kortsluiting van de boosteruitgang.