stay alive for piko smartdecoder 4.1

[bluedepot]

Goedenavond vrienden

Sorry to post in English

How can I add a "stay alive" to a Piko sound Smart decoder 4.1?

What type of "stay alive" do I need to buy?


Many thanks


Tim

[Simplex]

This was my answere a few years ago.

When using an ESU power pack in
combination with the following CV values.
Just works with the Piko 4.1 LokSound decoder.

CV 31 = 16
CV 315 = 0 This is set to 1, but then
the power pack does not work.
CV 113 = 200

I have these values in all 3 of my Piko SNCB
73 and they are all fitted with with the Piko
sound decoder RH 7300 (4.1).

I also use this for my ESU sound decoders,
and decoders from other brands.

[bluedepot]

Thank you that's really helpful.

Did you put the ESU power pack mini in your SNCB 73?

Cheers


Tim

[Simplex]

Yep, that's a perfect fit. In other engines
like the Z65 from Jeco, I took the PP mini
apart, so it could be placed separately.
Just remember to adjust it again on the
right poles, otherwise it will go wrong.

[bluedepot]

ok great thanks stedahult

does the decoder have solder pads to attach the wires to?

cheers


tim

[Simplex]

Yes, the same as the ESU decoder. You can
follow the instructions on the manual wich
is deliverd with the ESU Powerpack.

[bluedepot]

ok great thanks for your help

best wishes


tim

[bluedepot]

hi again

sorry but do you have a picture or diagram to show which solder pads on the piko 4.1 plux22 smart decoder I attach the 3 wires from the ESU power pack to?

thank you


tim