BeneluxSpoor.net forum
Wat zijn we aan het bouwen? => Materieel => Topic gestart door: FritsT op 18 March 2025, 11:24:05
-
Er zullen niet veel modelbouwers zijn die deze pantograaf zullen gaan maken, maar ik weet dat er belangstelling voor is.
Over Vs1. waren we in de bouwgroep bijna tevreden en Vs.2 heb ik vandaag in elkaar gezet.
Wat je nog extra nodig hebt:
- draad 0,5mm messing
- draad 1,0mm messing
- boortje 0,5mm
- 10-secondenlijm (Als je de assen vast zou willen lijmen, maar draad ombuigen kan ook)
- 2 veertjes (buitendiameter 1,5mm)
Ik raad aan om te boren met een boorkolom want de speling op de twee stuurstangen is krap en scheef=scheef.
De gietboom:
Met 1 extra framesteun in geval die gaat vliegen tijdens de bewerking. :'(
(https://live.staticflickr.com/65535/54379840983_b666265a99_z.jpg) (https://flic.kr/p/2qRmUae)
Ik heb diverse stadia van constructie gefotografeerd zodat je goed kan zien wat waar komt te zitten.
Klik op de foto's voor een vergroting.
De twee uitsteeksels aan het rek moet je in eerste instantie NIET afslijpen. Daarmee kan je het rek inklemmen in de machineklem.
(https://live.staticflickr.com/65535/54394398251_477c3f0fbb_z.jpg) (https://flic.kr/p/2qSDvwB)
Goed horizontaal en verticaal uitlijnen in de klem,
(https://live.staticflickr.com/65535/54394398226_2740cb6673_z.jpg) (https://flic.kr/p/2qSDvwb)
(https://live.staticflickr.com/65535/54393515802_65851c033f_z.jpg) (https://flic.kr/p/2qSyZcY)
Niet in een keer alle vier de gaten doorboren. Omdraaien zodat alles gecentreerd blijft
(https://live.staticflickr.com/65535/54394768580_c3519f9831_z.jpg) (https://flic.kr/p/2qSFpBA)
(https://live.staticflickr.com/65535/54394398251_477c3f0fbb_z.jpg) (https://flic.kr/p/2qSDvwB)
(https://live.staticflickr.com/65535/54393515797_1966a990f7_z.jpg) (https://flic.kr/p/2qSyZcT)
Het frame heb ik zo ingeklemd,
(https://live.staticflickr.com/65535/54394768520_5a07f4ec10_z.jpg) (https://flic.kr/p/2qSFpAy)
(https://live.staticflickr.com/65535/54394398161_56b45b56cd_z.jpg) (https://flic.kr/p/2qSDvv4)
(https://live.staticflickr.com/65535/54394627783_b3fdc50196_z.jpg) (https://flic.kr/p/2qSEFL4)
Dan komen de stangen aan de beurt.
In willekeurige volgorde:
(https://live.staticflickr.com/65535/54394627753_2c70866ed6_z.jpg) (https://flic.kr/p/2qSEFKx)
Hier wordt het boren op de punten aan de rechterzijde kritisch, maar niet onmogelijk.
(https://live.staticflickr.com/65535/54394581264_1b4fbe1265_z.jpg) (https://flic.kr/p/2qSErW1)
(https://live.staticflickr.com/65535/54394398181_e899d8e55b_z.jpg) (https://flic.kr/p/2qSDvvp)
(https://live.staticflickr.com/65535/54394581209_8ebc4c0076_z.jpg) (https://flic.kr/p/2qSErV4)
(https://live.staticflickr.com/65535/54393515772_2d1d36bc58_z.jpg) (https://flic.kr/p/2qSyZcs)
(https://live.staticflickr.com/65535/54394398151_e948f5d544_z.jpg) (https://flic.kr/p/2qSDvuT)
(https://live.staticflickr.com/65535/54394627713_79f4774cdf_z.jpg) (https://flic.kr/p/2qSEFJR)
(https://live.staticflickr.com/65535/54394398126_53c0df356e_z.jpg) (https://flic.kr/p/2qSDvus)
(https://live.staticflickr.com/65535/54394798760_075e6df9ec_z.jpg) (https://flic.kr/p/2qSFyzW)
(https://live.staticflickr.com/65535/54394611179_e60e807e61_z.jpg) (https://flic.kr/p/2qSEAPM)